1.10A DC to DC negative booster
2.high transfer efficiency
3.10 years history of producing
4.strict quality test
10A DC TO DC Negative Booster Power Transrorm
- -The product can change DC 20-30V into stable DC 12V output, with
the function of overvoltage protection, overcurrent protection and
short circuit protection. It can be widely used at the workplace
where the DC power supply system is unmatched or unstable, such as
- -The product is made by advanced PWM chip technology, and can work
in the state of ultrasonic sound. It can’t only reduce the volume
and weight, but help the circuit work without noise at the same
time. It shows ” Much smaller, lighter, quite and more convenient”
. It’s designed with multiple protection to the circuit. It can
protect the electrical appliance and automotive circuit
effectively. When the output voltage exceeds the rated output, the
product will stop working and the electrical appliance are
Means of Usage
- Keep the converter in ventilation and dry environment.
- Connect 24V input side to power connector. The section of wire
should be no less than 2.5mm2. The red wire is with anode, the black one is with cathode.
- Connect 12V output side with the appliances. The section of wire
should be no less than 2.5mm2. The red wire is with anode, the black one is with cathode. The
current of the equipment should be less than the rated current of
- Switch on the electricity to power the converters, the indicator
- Turn on the equipment, it will work normally.
|Over Voltage protection||Stop working|
|Short Circuit protection||Yes|
- Please don’t connect this product with the electrical appliance
whose power is larger than the rated one to avoid any fault.
- Don’t use this product for long time when the engine stops,
otherwise the car can’t be started because of the low voltage of
the car battery.
- Please follow the instruction of electrical appliance strictly
- Don’t use this product in high-temperature, moist and dusty
- Don’t disassemble and modify this product personally.